WSK-(1)G(TH) Fixed Temperature and Humidity Controller
Category :
Keyword :
WSK-(1)G(TH) Fixed Temperature and Humidity Controller
hiddenValue
Product Introduction

| Main Functions Equipped with one temperature and humidity monitoring unit each. When condensation occurs or the ambient temperature falls below the preset value, the heater is quickly activated to heat and dehumidify, effectively preventing condensation and restoring normal temperature. Can switch between manual and automatic modes, available in heating and cooling types. |
| Technical Parameters Power Supply: AC220V (±10%) Frequency 50/60Hz. Operating Environment (for the monitor): Temperature -25 to +120℃, Relative Humidity ≤95%RH Start Control: When humidity ≥85%RH ±5% (can also be specified by the user) Stop: When humidity ≤ Start Control - 10% Temperature Control: Heating type: Start control at ≤5℃ ±2℃, stop at ≥15℃ ±2℃ Cooling type: Start control at ≥45℃ ±2℃, stop at ≤30℃ ±2℃ Response Speed: Typical value ≤5s Output: Active contact output (normally open), rated power resistive load AC220V 5A Load Capacity: 1 times working voltage, rated power resistive load AC220V/5A. Power Consumption: ≤5W Dimensions: 48×48×78mm 3 Cutout Size: 45×45mm |
| Installation Method 1. Base type (rail type) installation: Fix the 8-pin base on a 35 mm rail or directly fix it on the mounting plate through mounting holes. 2. Embedded installation: Cut a 45 +0.5 ×45 +0.5 mm 2 hole on the mounting panel, and fix the monitor on the panel through the mounting bracket. |
| Rear View Wiring Diagram |

| WSK-1G(TH) |
WSK-G(TH) |
WSK-1G(TH) Shared Load |
WSK-G(TH) Shared Load |
Related Products
Consult Now
Hello, what do you need us to do for you?


